Home       |       About Us       |       Product       |       Contact us      |       Feedback 

  PASSENGERS & CHASSIS

PASSENGERS

Eicher Skyline School Bus

Eicher Skyline Executive Bus

Eicher Starline School Bus

Eicher Starline Standard Bus

Eicher Starline Route Permit Bus

Eicher Cruiser CNG School Bus

 

PASSENGERS & CHASSIS

Eicher 10.50 Bus Chassis

Eicher 10.75 Bus Chassis

Eicher 10.90 Bus Chassis

Eicher 11.10H Bus Chassis

Eicher 11.10K Bus Chassis

Eicher 20.15 Bus Chassis

Eicher Cruiser CNG School Bus

A new chapter on the ‘clean’ and the ‘green; environment is the Cruiser School bus. Jointly designed by Eicher and IRTE (Institute of Road Traffic Education) this bus comes as a genuine assurance of safety and comfort for school children. The exclusive safety features of this bus like the Speed Alarm along with various other features sets it apart from any similar product in this category. In a nutshell, the Cruiser School Bus symbolizes the trust that parents place in a school. The responsibility they carry. And everything that conveys the right image of the school. The image of love, care and trust

 

Salient features of Eicher Cruiser CNG School Bus are :

Extra smooth sliding windows fitted with safety bars.

"Stop" sign comes out with the door opening.

Rear top of the seats are padded to minimize head injury in the event of sudden impact.

Speed alarm unit near the driver to monitor the speed of the bus.

Two handles on the rear side of the seat at convenient height (even for children) - providing support for holding while the bus is in motion.

A First-Aid box.

TECHNICAL SPECIFICATION

MODELS 10.90K
DIMENSIONS
Wheelbase (mm) 4800
Overall Length (mm) 8677
Overall Width(mm) 2100
Overall Height(mm) 2850
Rear Overhang(mm) 2872
Front Overhang(mm) 1005
Ground Clearance(mm) 210
Min Turning Radius(m) 8.8
GVW(kgs) 8720
ENGINE SPECIFICATION
Engine Type E 483 NA CNG engine
Bore Stroke 100mm x 105mm
Max Power
62 KW @ 3200 rpm- BSIII
Max Torque 229.5 Nm  @ 1600 rpm- BSIII
CLUTCH 275 mm dia, Single dry type plate
TRANSMISSION
Gear  5 forward & 1 reverse. 2-5 Synchromesh,1 Reverse  Constant mesh
 
CHASSIS FRAME Stright Ladder type "C" Channel
Member size 181mm ( web) x 65mm (flange) x 5mm (thickness)
SUSPENSION
Front Suspension Semi Elliptical Laminated Leaf Spring (6 leaves)
  Hydraulic double-acting telescopic type shock absorber
Rear Suspension Semi Elliptical Laminated Leaf Spring (6 leaves)
  Hydraulic double-acting telescopic type shock absorber
ELECTRICAL
Battery 12V-70 Ah
Alternator 12V-50 Amp
STEERING Manual Steering
BRAKES  
Service Brakes Full Air "S" Cam Brakes
TYRE
Tyres (Front) 7.50 * 16-16 PR
Tyres (Rear) 7.50 * 16-16 PR
CAPACITY
Fuel tank 6x60lts
SEATING CAPACITY
Standard 40+1
Light Duty Vehicle Heavy Duty Vehicle Passengers & Chassis

All rights Reserved. Site Developed & Designed by MaxTech Solutions